Search
Member CheckerHoneywell MS7120-38 Orbit pre-configuration set up
If you are using the Honeywell MS7120-38 Orbit scanner (See below) with Memberchecker you will firstly need to carry out the following instructions.
Before starting your set up you will need to plug your scanner in and allow your computer to install the device.
You then need to print off the Honeywell MS7120-38 Orbit document provided in the link at the top of this page and scan all 4 barcodes in order from top to bottom. Note: It is best to cover the other bar codes with a sheet of paper to ensure the barcodes are not accidently scanned in the wrong order.
Once you have done this you will need to read our how to guide on setting up your scanner: http://support.sports-booker.com/member-checker/how-to-configure-your-memberchecker-settings